Repair a Stone Patio Fireplace

A stone patio fireplace works in any type of house, but when it begins to deteriorate, it can be a headache and creates the urge to take a mallet and demolish it. This will not solve anything and on the contrary it will generate a bigger problem, that's why it is better to think about repairing our fireplace so that it remains a pleasant space in our home.

At South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia, we give you a step-by-step method to repair your stone patio fireplace:

Step 1 - Remove the loose material
Before starting, be sure to remove all loose debris. Use a stiff wire brush and rub the mortar and stone until it crumbles so that it has to crumble.

Step 2 - Apply the mortar
Mix a little mortar, calculate how much you will need for each zone separately, as it hardens quickly, and start pressing on the applied area with a small spatula. Complete one area at a time, making sure not to add too much mortar, as it is very difficult to remove after it has hardened.

Step 3: Final cleaning
To finish the maintenance, you have to clean around the areas you have repaired. Wait until the mortar has completely dried and with a wire brush remove excess mortar, including areas around the chimney where mortar may have dripped.

Repairing a stone patio fireplace is an easy job that can be done in a matter of hours, but it will always be better if it is done by professionals.

Please contact us today to find out how South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta Newnan, Sharpsburg, and Senoia can help you renovate or create the best place for your home. 

For more information in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia call us: (678) 628-9987 

Please visit us: www.southatlanticmasonry.com