viernes, 30 de marzo de 2018

How to keep a clean stone wall in two steps


If you have a stone retaining wall in your yard, you should be aware of the importance of keeping it clean. Fortunately, these types of walls are very easy to wash, which facilitates doing it as frequently as you wish.


At  South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia, we give you this guide to keep a clean stone wall: 

Step 1: Sprinkle your stone wall with water
The best way to do it efficiently is to spray it with a garden hose or a pressure washer. In case the wall has excessive dirt if it has not been cleaned in a long time, use a towel or a soft spore to help in the process ..

Step 2: Scrub the stone wall
Now that your wall is wet and you have removed the surface dirt and debris, use a bristle brush to remove the remaining stains. You can do it using a mild detergent and if the stain is very strong, you can use bleach dissolved in water. When the wall is completely clean, make a last wash with water pressure as a rinse to remove substances and what is left.


In this way you will always have a clean and healthy stone wall.


Please contact us today to find out how South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta Newnan, Sharpsburg, and Senoia can help you renovate or create the best place for your home. 

For more information in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia call us: (678) 628-9987 




Please visit us: www.southatlanticmasonry.com

viernes, 23 de marzo de 2018

Take advantage of spring to clean the front of the fireplace


Now that only spring begins, it is a good time to clean the front of our fireplace and have ready for the seasons of the year.

At  South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia, we give you this guide to efficiently clean the front of your fireplace:

Step 1. Cleaning the ashes of a chimney.
Remove the bottle from the inside of the fireplace and remove the remaining ashes with the brush from the chimney so that the debris does not reach the area you are cleaning. Then, completely vacuum the loose sand or dust. Once the debris has been completely swept, make sure the area surrounding the home has access or newspapers to protect your floors.

Step 2. Clean around a fireplace

Even if you use mild cleansers, it is mandatory to wear rubber gloves. It is likely to be rubbing a little, and your hands will thank you for wearing proper gloves. Protective goggles like goggles are also highly recommended because even dirty water can cause irritation.

Step 3: Choose a cleaning solution
The types of cleaners that use the safe place to clean the place. Start first with the fastest cleaning options and move on to any corrosive solution. If the area has been sealed, it may be enough to wash it with warm water and a cloth.

Step 4 - Eliminate persistent stains
If the home has been severely neglected and the stains are more severe, you may need to use harsher chemicals to remove the soot. Start by mixing a paste of one cup of ammonia with one pound of ground pumice and enough water so that you can APPLY the mixture directly in the difficult places. Once again, let it stand for 10 minutes, and then rub and rinse.


You may consider applying a sealant that will better protect the stone in front of your fireplace. And that's it!


Please contact us today to find out how South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta Newnan, Sharpsburg, and Senoia can help you renovate or create the best place for your home. 

For more information in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia call us: (678) 628-9987 

Please visit us: www.southatlanticmasonry.com



viernes, 16 de marzo de 2018

A step by step method to wash your stone patio


Having a stone patio gives a lot of style and value to the outdoor areas of our houses. But the fact of being exposed to the weather requires a lot of care and maintenance. Moss, dirt and other debris will stick to the stone, and it has to be cleaned frequently and properly, as it not only damages aesthetics, but is also dangerous because it makes the floor slippery. Also, weeds are another problem for stone courtyards, and they will have to be eliminated regularly.

At South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia, we give you a step-by-step method to help you maintain your stone patio in good shape:

Step 1 - Prepare the stone patio for cleaning
What you must do first is remove furniture, accessories and additional elements to work comfortably.

Step 2: Manually remove the grass
You should be on your knees removing the grass that grows between the rocks. The growth of the root from the weeds can cause the stones to have water under them, which will cause the stones to jump or, worse, to break or break. After removing iodine you must apply herbicide in the cracks spraying it Let the herbicide sit according to the manufacturer's instructions.

Step 3 - Clean the stone
Wearing safety glasses, spray the stone with water under pressure with your washing machine. Next, add the cleaning solution to the washing machine. Spray the patio at an angle to loosen any remaining debris and to avoid grinding any dirt on the stones. After having thoroughly washed, allow the cleaning solution to settle for 10 minutes to absorb the soil in the dirt of pedestrian traffic. Before drying completely, use the washing machine again, with only water, to rinse the patio thoroughly. Allow the patio to air dry.


In most climates, washing this way 2 to 3 times a year is enough to keep your stone patio in perfect condition.


Please contact us today to find out how South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta Newnan, Sharpsburg, and Senoia can help you renovate or create the best place for your home. 

For more information in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia call us: (678) 628-9987 


Please visit us: www.southatlanticmasonry.com

viernes, 9 de marzo de 2018

Have you thought about having a natural stone retaining wall?


The natural stone retaining wall is a wall that is usually built of dry stone or slab bricks. They are used to hold or design a raised area of ​​soil as a containment or to provide a terraced environment on sloping ground. The components are supported by a wall that keeps them clean and solid. They are ideal for landscape gardens.

At  South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia, We are professionals in the construction of stone walls, so we want to show you its features and advantages:

Benefits
The natural stone is ecologically and aesthetically beautiful. It gives a rustic atmosphere to a garden, which makes it seem more as if nature had planned it and not a landscaper. There are several types of natural stone that can be used in a retaining wall. It is also commonly used for an outdoor seating area, as long as the wall is wide enough so that it can take the upper slabs to use as stone seats.

Applications
They are not only used in gardens, but also in more natural and wild environments. They act as containment barriers to avoid landslides where cuts have been made on sloping land. Lus also use along the shorelines to prevent the fall of the land and to protect the coast from high tides. This weakens the soil and the retaining walls protect the integrity of the ground.


Please contact us today to find out how South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta Newnan, Sharpsburg, and Senoia can help you renovate or create the best place for your home. 

For more information in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia call us: (678) 628-9987 

Please visit us: www.southatlanticmasonry.com

viernes, 2 de marzo de 2018

How to remove the facade of your stone fireplace



When you think about redesigning your stone fireplace, it will be necessary to remove the facade. The reasons for removing it may be too old, or because stones are missing or maybe because it does not fit the style of the room where it is located. In this guide, you will indicate how you can do it yourself.

At  South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia, we give you this guide In case you think about remodeling your fireplace: 

Tools needed

You need a cold chisel and a small hammer, that's all you need to remove the stone.

Remove the fireplace

The first step is to remove the mantelpiece from the fireplace. You can do this easily by prying with the chisel by tapping it with the hammer.

Find a joint
To do this you must locate the mortar joints and the union of the rock. With the use of the chisel and the hammer, start with strong blows on the chisel and prying. When the mortar is loose on the facade of the stone fireplace, remove each of the stones with your hand. you must do it stone by stone, working from top to bottom.


Once the façade is removed, you can redesign your fireplace according to the desired style, for this we recommend you to consult with experts on the subject.


Please contact us today to find out how South Atlantic Masonry and Concrete Contractor located in Peachtree City, Atlanta Newnan, Sharpsburg, and Senoia can help you renovate or create the best place for your home. 

For more information in Peachtree City, Atlanta, Newnan, Sharpsburg, and Senoia call us: (678) 628-9987 

Please visit us: www.southatlanticmasonry.com